3M™AccuSpray Turbine Systems
3M™AccuSpray Turbine powered spray systems have lead the industry for over 25 years. The spray gun is the heart of a turbine system and 3M™AccuSpray is well know to make the finest HVLP gun on the market. The Series 10 hand gun in now available in bottom feed and gravity fed design. Their turbine systems are available in 2 stage, 3 stage, 4 stage, Industrial 3 Stage and a noise reduced turbine box design know as the TNR. They use three different turbine motors and two different turbine blades. It is important that one understand the differences between these when looking to make a purchasing decision. Their standard motor and 5.75" turbine blade is used on the 220, 23i, and 240. The 23i & 240 provide 85 CFM of air. The 230 turbine uses a heavier grade motor and sports 7.25" turbine blades producing 115 cfm of air. Air volume is important when selecting a turbine system. The easiest way to explain how an HVLP gun atomizes will help you choose the right turbine and the correct atomization set on the gun. Think of spraying water from a garden hose with your thumb held over the end of the hose. The greater volume of water flowing through the hose and the tighter you hold your thumb closing the open space of the open end the greater the water sprays the water. Think of the air flow as water and the space between the middle hole in the air cap and the nozzle as the thumb. The difference between the standard AccuSpray Air Caps is the diameter of the center hole. As nozzle sizes increase the outer diameter changes. You wouldn't want to use a #4 Air Cap with a 084" nozzle.
More Information on Air Cap Nozzle Selection>>>
3M™AccuSpray 23i Turbine System
Award winning model. The 23 turbine is a Standard 110V 10amp three stage 5.75" bladed turbine producing 85 CFM.
PURCHASING INFO>>>
3M™AccuSpray 240 Turbine System
Award winning model. The 240 turbine is a Standard 110V 10amp four stage 5.75" bladed turbine producing 85 CFM.
PURCHASING INFO>>>
3M™AccuSpray 240c Remote cup Turbine System
Award winning model. The 240c turbine is a Standard 110V 10amp four stage 5.75" bladed turbine producing 85 CFM. With a 1/8HP diaphragm compressor which supplies air to the systems 2 quart remote paint tank. Also available set up with gravity or bottom fed airbrush system.
PURCHASING INFO>>>
3M™AccuSpray 230 Turbine System
3M™ AccuSpray's heavy duty electric motor running three stage 7.25" turbine blades, 110V 10 amp producing 115 CFM.
PURCHASING INFO>>>
3M™AccuSpray 2030 TNR Turbine System
3M™ AccuSpray TNR system has the same motor and three 5.75" blades as the 23i. The only difference is that they have mounted the motor in a baffled noise reducing box which features a cart design for easy transportation.
PURCHASING INFO>>>
3M™AccuSpray 2040 TNR Turbine System
3M™ AccuSpray TNR system has the same motor and four 5.75" blades as the 240. The only difference is that they have mounted the motor in a baffled noise reducing box which features a cart design for easy transportation.
PURCHASING INFO>>>
3M™AccuSpray 2045 TNR Turbine System
3M™ AccuSpray TNR system has the same motor and four 5.75" blades as the 240c including the compressor and the 2 quart paint tank. The only difference is that they have mounted the motor in a baffled noise reducing box which features a cart design for easy transportation.
PURCHASING INFO>>>
About Us | Site Map | Policy | Contact Us
©2007 US Diversified Tech, LLC